Showing posts with label diy. Show all posts
Showing posts with label diy. Show all posts

19 February 2014

lunch bag tutorial

my friend saved us from the cold by lending us her space heater, and I wanted to give her something special to say thank you!  since her littlest girl is starting preschool next year, I thought it would be cute if I made both of her girls customized lunch sacks.

I had seen, but not paid much attention to, several tutorials on lunch bags.  when I actually sat down to look, I could not find one that met all of my criteria:  lining (so that it could be wiped), a handle, and a closure other than Velcro (I am not a fan of Velcro.)

So, I decided to make a tutorial of my own.  The finished bag is about the size of a paper lunch sack, and lies flat for easy storage!

 
 
For this tutorial you will need:
  • 2-13x9.5" outer fabric panels.  I used a quilters cotton, and pre-washed before cutting.
  • 2-13x9.5" lining fabric panels.  I cut up an old tablecloth, so it already had a 'fleece' backside.  This also made my lining stiff, which cut down on ironing.
  • 1-4x10" handle piece. I used the same fabric as my outer fabric panels.
  • 12" of .25" grosgrain ribbon. You could probably use 10" but I like having extra.
  • 1 back loop button.
Sewing supplies:
  • scissors
  • ruler
  • straight pens
  • writing utensil
  • thread
  • sewing machine

On one of the outer panels, make a mark 5.5-5.75" from the top.


Sew on back loop button, set aside.


to make the handle, fold long direction into thirds, and iron flat.



Sew both sides into place using .25" seam.  I used a zigzag stitch because they tend to be the most forgiving.


Fold each end of the handle .75" and iron to create fold.


[If you want to add an embellishment to the back of the bag, now is a good time to embroider, or sequin the panel without the button.]

Center handle 3" from top on the other outer fabric panel (the one without the button.) Pin in place with ironed flaps tucked under.


Sew a box around the ironed under flap at each end.


Now that the handle is on, it is time to attach the ribbon closure.  center the ribbon just above the handle (about 3" from top.)  Pin in place.


Stitch ribbon into place.  I backstitched/stitched about 3 times each.


Tie ribbon in a loose knot, tuck and pin under handle.


Pin back panel to lining, right sides facing.


Using a .25" seam sew along only the top side.  repeat with front outer panel and other lining panel.


you now have 2 sets of one outer/one inner sewn together.



Place outer/inner panels right sides facing together.


Pin around entire perimeter, leaving 3-4" opening on the lining panels.  When pinning the lining side, turn pins parallel to edge, so that lining doesn't have pin holes.


Sew around perimeter using a .5" seam.  I also did a zigzag stitch on the outside edge, in the absence of a surger.


Gather each corner matching the side seam to the bottom seam, creating a triangle.  Mark a 3" line across each corner and sew.  Reinforce with zigzag stitch.


Cut off triangle, on outside of zigzag stitch. Repeat for all four corners.


Turn right-side out, keeping lining and outer bag separate.  Sew opening in the lining closed, stitching as close to the edge as possible.


Tuck lining into outer sack, making sure corners are fully turned. Pull outer lining slightly over the top edge.


Sew around the top edge using .25" seam.


Unpin the ribbon from handle, and fold down (two or three times) so that the handle is at the top of the bag. Tie knot in ribbon at desired length.  Secure with hot glue or by sewing a few stitches into knot.  Trim tails.


Finished!

Two cute lunch bags for two cute little girls! 



later days

29 March 2013

upcycling: men's jacket to child's apron

i needed some buttons for another project, and nwam had men's jackets on clearance for $.25 a piece.  after i stole the buttons i didn't want to return them to the store, and really hated to toss the material, so for emily's party i made an apron for each walking child that came. = )
 
 
first step was to wash the jacket (and other pieces that gave their life for the straps) whether or not it said 'washable.'  i was not putting anything from a thrift store on my child (or anyone else's) without washing it!
 
before: washed/shrunk jacket & button less dress
next is to cut out as much of the front panel as possible.  there is still a ton of waste, but it isn't as bad as tossing the entire jacket!



next, cut out an 'apron' shape from the panel.


to make a rounded stitch, use a plate to draw an arc, then a ruler to draw the lines up to the edge of the pocket.


using a similar color thread as the jacket, sew a basic stitch around the marker, wrong side up.


flip over so the correct side is up, and sew desired stitch along the basic line. (she had a tulip party, so i used my 'tulip' stitch)



now the tedious part, pin around the perimeter, as close to the edge as possible, then sew using a similar thread color.


almost done, time to add the ties.  first i added the waist tie.  i stole one of the ties from the dress, pinned it in place, and sewed straight across.


for the neck tie, i stole a piece of the hem and cut around with pinking shears.  pin in place and sew a rectangle at each end.


each jacket yielded 2 aprons.  it made a great candy collection pocket for the kids after the pinata broke!
 
after: 2 cute aprons! (please forgive my dirty carpet.)

later days

02 February 2013

a car track for the car

so, jamie's little one will celebrating his fourth birthday this weekend.  since i've never been nor had a four year old boy, i went with 'cars' since they seem to be universally enjoyed by all little boys. = )

when billy found a new home for his electric drill, he cleaned out some of the miscellaneous tools he'd opted to store when we reorganized the storage shed.  one of the sets was an incomplete ratchet set.  the case is thin and durable, so i decided to put the tools in my 'swap' pile, and keep the case. after looking at the case just sitting on the counter for several days, i had the brainstorm that i could make a toy the birthday boy could keep in the car.

so, i started with my case:


i went to the store and bought some off brand cars (i couldn't bring myself to destroy a matchbox car by gluing a magnet to the bottom) and used gorilla glue to attach some magnets to the bottom.  these had to dry overnight.



i taped the edges and handle, then spray painted the inside green.  after letting it dry for 6 hours i used some black acrylic paint to make a road.  after letting it dry overnight, i used yellow acrylic paint to paint in the lines.


during one of the dry times, i embroidered a cover to personalize the case.  i sewed on buttons for the tires, and ironed on some fusible fleece, so that it would be cushioned while sitting on his lap. = )



after all the paint dried, i glued on the outside fabric, stretched it shut and secured with clips.  this also had to dry overnight.  my last step was to glue the edges on the inside, and cover the inside edge by gluing on some ribbon.  i secured the edges/ribbon with the same clips as before.


once everything dried, i added the cars & have a nice little toy for the birthday boy to keep in the car!



if i had more time there are a few things i would redo, but since the party is right now, the few imperfections i left will hopefully just endear it to the recipient. = )

later days

20 December 2012

45 minute cartoon stick horse - tutorial

a long time ago, when alice was our only child, i made her a stick horse for their school's rodeo day.  she was 6 months old at the time, so didn't even need it, but the letter said she needed to bring one.  so i made her a horse.

lately in our home, you cannot give something to one child without the other fussing for their share.  i'm doing my best to promote 'sharing' since they will need to do lots of that in life, and alice is very good about it, emily is a sore sport at times though.  so i decided to make a second stick horse for our home, since the first one held the 'favorite toy' spot at least once a day.

this stick horse won't win any awards for beauty, but since that wasn't my goal, i call it a success.

step 1. fold your fabric in half, trace or freehand the head of a horse onto one side. allow an extra inch on each side for stuffing & seams.  don't forget to draw in the ears!


step 2. pin the perimeter and cut through both pieces of fabric.


step 3.  to make the mane, zig zag your yarn or thread.


step 4.  place majority of yarn or thread between your two pieces of fabric, leaving 1/2inch on the outside.  pin into place. i also put a small portion just in front of the ears.


step 5. tuck in your ears if you've not already done so (and turn your pins if you are so inclined)


step 6. sew around the perimeter of the head, leaving bottom completely open. i used a 1/4 inch allowance.  after your stitches are in place, trim away extra fabric & yarn.


step 7. turn head right side out.


step 8. using fusible fleece & a round object, trace and cut 2 circles for the eyes.


step 9.  iron on eyes to each side, and find 2 small buttons for the pupils (mine didn't match, but since they are on opposite sides, it is not noticeable).


step 10. sew on buttons.


step 11. stuff the head with stuffing.  use enough to make the head firm, so that the stick will stay in place.


step 12.  using a dowel rod (or cut off broom stick handle) insert end into middle of stuffing, keeping 1-2 inches of stuffing between the stick and the fabric. using a staple gun, staple fabric to stick (you could probably use glue here too.


step 13. wrap fabric around staples and secure (so that little hands don't get hurt.)


step 14. i used some scrap ribbon to make the reins.


step 15.  play the finale to the william tell overture nice and loud, grab a cowboy hat and ride!




so, we're good for another 20 months.

later days