Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

16 January 2016

cord wrap tutorial

forever a couple of years ago, I made one of my friends some lunch sacks for her two girls.  since she recently had a baby, she asked if I could add one to her collection, for the newest addition. 
 
today I finally started the process by picking out a selection of fabrics for her to look over. once she picked one, I took out all my cutting supplies.  and of course, while I had out all my cutting supplies, I thought that it would be a good idea to cut fabric for a zipper pouch (they make good gifts.)  and since I had the fabric out for the zipper pouch, why not make a quick cord wrap.
 
I had the tutorial for the sacks, that I'd made for myself, brought up on my computer, and as I was reading over it, thought, I need to make one for the cord wraps, in case I ever forget!  so as I made one (instead of working on the lunch sack) I took pictures, and now here is the tutorial:
 
materials:
1 - 6 x 3.25" outer fabric - I used a printed canvas like material, but cotton works better. 
1 - 6 x 3.25" lining piece - I used a cut up blanket that is like a thick felt. but fleece would be comparable.
1 - 6 x 3.25" inner fabric - I used a silk and this was a mistake.  it pulled apart on the edges. cotton or linen would have worked better.
a 3.5" piece of 1/4"-3/8" elastic
a button with a back loop, though you could probably use a regular button, as long as it is large enough to catch the elastic.
 
start by cutting each of your fabrics and piece of elastic.
 

assemble them in a single pile: outer fabric facing up, inner fabric facing outer fabric, lining.  loop the elastic so that the loop is in between the inner fabric and outer fabric.  pull the edges out about 1/2" to make sure they both are caught in the seam width.


sew around 3 of the edges, with a 1/4" seam width.  on the third side, leave an opening through which to turn it.  sew around a second time with a zig zag stitch to secure the fabric and elastic.


trim the edges, and cut the corners at a diagonal to help with turning.


after turning, iron flat.  tuck under edges of opening.


top stich 1/4" around the edge.  this will close the opening.  in my case, I used a zig zag stitch because my silk liner was coming apart.  the canvas was stiff and did not turn well.  cotton is infinitely better for this project.


fold wrap in thirds.  pull the elastic up, but do not put any stretch on it.  mark your spot.


unfold and sew on your button.


wrap, loop, and enjoy your new organized cord!  it is a very forgiving project, and so quick!





later days

19 February 2014

lunch bag tutorial

my friend saved us from the cold by lending us her space heater, and I wanted to give her something special to say thank you!  since her littlest girl is starting preschool next year, I thought it would be cute if I made both of her girls customized lunch sacks.

I had seen, but not paid much attention to, several tutorials on lunch bags.  when I actually sat down to look, I could not find one that met all of my criteria:  lining (so that it could be wiped), a handle, and a closure other than Velcro (I am not a fan of Velcro.)

So, I decided to make a tutorial of my own.  The finished bag is about the size of a paper lunch sack, and lies flat for easy storage!

 
 
For this tutorial you will need:
  • 2-13x9.5" outer fabric panels.  I used a quilters cotton, and pre-washed before cutting.
  • 2-13x9.5" lining fabric panels.  I cut up an old tablecloth, so it already had a 'fleece' backside.  This also made my lining stiff, which cut down on ironing.
  • 1-4x10" handle piece. I used the same fabric as my outer fabric panels.
  • 12" of .25" grosgrain ribbon. You could probably use 10" but I like having extra.
  • 1 back loop button.
Sewing supplies:
  • scissors
  • ruler
  • straight pens
  • writing utensil
  • thread
  • sewing machine

On one of the outer panels, make a mark 5.5-5.75" from the top.


Sew on back loop button, set aside.


to make the handle, fold long direction into thirds, and iron flat.



Sew both sides into place using .25" seam.  I used a zigzag stitch because they tend to be the most forgiving.


Fold each end of the handle .75" and iron to create fold.


[If you want to add an embellishment to the back of the bag, now is a good time to embroider, or sequin the panel without the button.]

Center handle 3" from top on the other outer fabric panel (the one without the button.) Pin in place with ironed flaps tucked under.


Sew a box around the ironed under flap at each end.


Now that the handle is on, it is time to attach the ribbon closure.  center the ribbon just above the handle (about 3" from top.)  Pin in place.


Stitch ribbon into place.  I backstitched/stitched about 3 times each.


Tie ribbon in a loose knot, tuck and pin under handle.


Pin back panel to lining, right sides facing.


Using a .25" seam sew along only the top side.  repeat with front outer panel and other lining panel.


you now have 2 sets of one outer/one inner sewn together.



Place outer/inner panels right sides facing together.


Pin around entire perimeter, leaving 3-4" opening on the lining panels.  When pinning the lining side, turn pins parallel to edge, so that lining doesn't have pin holes.


Sew around perimeter using a .5" seam.  I also did a zigzag stitch on the outside edge, in the absence of a surger.


Gather each corner matching the side seam to the bottom seam, creating a triangle.  Mark a 3" line across each corner and sew.  Reinforce with zigzag stitch.


Cut off triangle, on outside of zigzag stitch. Repeat for all four corners.


Turn right-side out, keeping lining and outer bag separate.  Sew opening in the lining closed, stitching as close to the edge as possible.


Tuck lining into outer sack, making sure corners are fully turned. Pull outer lining slightly over the top edge.


Sew around the top edge using .25" seam.


Unpin the ribbon from handle, and fold down (two or three times) so that the handle is at the top of the bag. Tie knot in ribbon at desired length.  Secure with hot glue or by sewing a few stitches into knot.  Trim tails.


Finished!

Two cute lunch bags for two cute little girls! 



later days

20 December 2012

45 minute cartoon stick horse - tutorial

a long time ago, when alice was our only child, i made her a stick horse for their school's rodeo day.  she was 6 months old at the time, so didn't even need it, but the letter said she needed to bring one.  so i made her a horse.

lately in our home, you cannot give something to one child without the other fussing for their share.  i'm doing my best to promote 'sharing' since they will need to do lots of that in life, and alice is very good about it, emily is a sore sport at times though.  so i decided to make a second stick horse for our home, since the first one held the 'favorite toy' spot at least once a day.

this stick horse won't win any awards for beauty, but since that wasn't my goal, i call it a success.

step 1. fold your fabric in half, trace or freehand the head of a horse onto one side. allow an extra inch on each side for stuffing & seams.  don't forget to draw in the ears!


step 2. pin the perimeter and cut through both pieces of fabric.


step 3.  to make the mane, zig zag your yarn or thread.


step 4.  place majority of yarn or thread between your two pieces of fabric, leaving 1/2inch on the outside.  pin into place. i also put a small portion just in front of the ears.


step 5. tuck in your ears if you've not already done so (and turn your pins if you are so inclined)


step 6. sew around the perimeter of the head, leaving bottom completely open. i used a 1/4 inch allowance.  after your stitches are in place, trim away extra fabric & yarn.


step 7. turn head right side out.


step 8. using fusible fleece & a round object, trace and cut 2 circles for the eyes.


step 9.  iron on eyes to each side, and find 2 small buttons for the pupils (mine didn't match, but since they are on opposite sides, it is not noticeable).


step 10. sew on buttons.


step 11. stuff the head with stuffing.  use enough to make the head firm, so that the stick will stay in place.


step 12.  using a dowel rod (or cut off broom stick handle) insert end into middle of stuffing, keeping 1-2 inches of stuffing between the stick and the fabric. using a staple gun, staple fabric to stick (you could probably use glue here too.


step 13. wrap fabric around staples and secure (so that little hands don't get hurt.)


step 14. i used some scrap ribbon to make the reins.


step 15.  play the finale to the william tell overture nice and loud, grab a cowboy hat and ride!




so, we're good for another 20 months.

later days