my friend saved us from the cold by lending us her space heater, and I wanted to give her something special to say thank you! since her littlest girl is starting preschool next year, I thought it would be cute if I made both of her girls customized lunch sacks.
I had seen, but not paid much attention to, several tutorials on lunch bags. when I actually sat down to look, I could not find one that met all of my criteria: lining (so that it could be wiped), a handle, and a closure other than Velcro (I am not a fan of Velcro.)
So, I decided to make a tutorial of my own. The finished bag is about the size of a paper lunch sack, and lies flat for easy storage!
For this tutorial you will need:
2-13x9.5" outer fabric panels. I used a quilters cotton, and pre-washed before cutting.
2-13x9.5" lining fabric panels. I cut up an old tablecloth, so it already had a 'fleece' backside. This also made my lining stiff, which cut down on ironing.
1-4x10" handle piece. I used the same fabric as my outer fabric panels.
12" of .25" grosgrain ribbon. You could probably use 10" but I like having extra.
1 back loop button.
Sewing supplies:
scissors
ruler
straight pens
writing utensil
thread
sewing machine
On one of the outer panels, make a mark 5.5-5.75" from the top.
Sew on back loop button, set aside.
to make the handle, fold long direction into thirds, and iron flat.
Sew both sides into place using .25" seam. I used a zigzag stitch because they tend to be the most forgiving.
Fold each end of the handle .75" and iron to create fold.
[If you want to add an embellishment to the back of the bag, now is a good time to embroider, or sequin the panel without the button.]
Center handle 3" from top on the other outer fabric panel (the one without the button.) Pin in place with ironed flaps tucked under.
Sew a box around the ironed under flap at each end.
Now that the handle is on, it is time to attach the ribbon closure. center the ribbon just above the handle (about 3" from top.) Pin in place.
Stitch ribbon into place. I backstitched/stitched about 3 times each.
Tie ribbon in a loose knot, tuck and pin under handle.
Pin back panel to lining, right sides facing.
Using a .25" seam sew along
only the top side. repeat with front outer panel and other lining panel.
you now have 2 sets of one outer/one inner sewn together.
Place outer/inner panels right sides facing together.
Pin around entire perimeter, leaving 3-4" opening on the lining panels. When pinning the lining side, turn pins parallel to edge, so that lining doesn't have pin holes.
Sew around perimeter using a .5" seam. I also did a zigzag stitch on the outside edge, in the absence of a surger.
Gather each corner matching the side seam to the bottom seam, creating a triangle. Mark a 3" line across each corner and sew. Reinforce with zigzag stitch.
Cut off triangle, on outside of zigzag stitch. Repeat for all four corners.
Turn right-side out, keeping lining and outer bag separate. Sew opening in the lining closed, stitching as close to the edge as possible.
Tuck lining into outer sack, making sure corners are fully turned. Pull outer lining slightly over the top edge.
Sew around the top edge using .25" seam.
Unpin the ribbon from handle, and fold down (two or three times) so that the handle is at the top of the bag. Tie knot in ribbon at desired length. Secure with hot glue or by sewing a few stitches into knot. Trim tails.
Finished!
Two cute lunch bags for two cute little girls!
later days