08 October 2012

reusable kitchen towels on a roll

it has been quiet on our blog for a week or so now, we've been busy!  plus, at the end of last week i fought off a bug that didn't really make me sick, but rather lethargic.  also, i've been working on my own set of reusable kitchen towels. = )  for my mom's i followed this tutorial that i found on pintrest, but since i don't have the same equipment, i thought i'd write my very own modified tutorial (with pictures of my own set!)
 
i used flannel and terry cloth for my set, since my selection of quilters flannel, in my area, leaves something to be desired.  i bought 2 yards of each, and it was more than enough for 13 towels.
 
after prewashing, cut thirteen(13) 13"X14" rectangles of each fabric.
 

using one panel of each fabric, place right sides together.  in all honesty, i don't think there is a 'right side' to terry cloth, but i did my best to put the "softer" side against the patterned side.


sew along 3 edges, starting with a long side, i used a 1/2" seam on my set.


to reinforce my edges, i went back along each of the 3 sides and put in a zig zag stitch.  hopefully this will prevent fraying and  reinforce the seam.


next i trimmed around the edges and rounded the corners, being careful not to cut the original seam.


turn it so the pattern is right side out


iron (i avoided ironing on the terry cloth directly, i don't think it will harm it, but since i'm new to the material i didn't want to take any chances).  this step is also where i tucked in a 1/2 inch of the fabric on the open side, and ironed it to create a crease.


now for the longest part, sewing the top. this time, sew around all 4 sides, closing the open edge. i used a decorative stitch on mine (and my mom's since it is a gift) and had to go slow so that i didn't stretch out the fabric.


i used a piece of 12"X12" scrapbook paper as a pattern to mark where my snaps would go.  this ensures that they will all line up when snapping them back together.


my itty bitty washable marker mark:


i used the awl that came with my snap tool, but on my mom's set i was able to just push the cap through the fabric (her set is 2 flannel panels.)



attach 2 snaps of the same type to the short end of each towel.


flip the fabric and attach 2 of the opposite snaps to the other side.


to make the core, i cut a piece of plastic canvas to a 5.5"X12.5" rectangle.  i used 3 snaps along each edge to make a cylinder.


using my scrapbook paper one last time, i marked off where the snaps should go on the roll to attach the fabric.


now for the best part, rolling up the towels!


viola!  they are bulky, but will hopefully serve us well for a long time (and cut down on the number of paper towels we use!) = )


later days

today i linked up with sugar and dots on what i whipped up wednesday = )

No comments:

Post a Comment