I was at MJ's, making a mess in her kitchen, and she apologized to me because her oven mitts were dirty. at least hers were cute, she'd probably cry if she saw the ugly, filthy things that we use (they were billy's before we were even married.) she said she wanted to replace hers, but couldn't find a pattern that she liked.
I had seen a tutorial on pintrest about making your own, but it called for thermal interfacing, and I didn't have that on hand. my plan was to buy some when we stopped at hobby lobby, but when I saw the oven mitts at dollar tree, the lazy, cheap girl in me came out. the quilting spacing was already measured out, and the binding the perfect size!
I picked the blue option, for the blue binding at the bottom, but I covered up the rest of the fabric. at hobby lobby I found some cute cotton fabric options for her to choose from, and bought 1/2 yd of the fabric (for 2.) they actually came out very nice, I'll probably make some for myself, once my world has calmed down again.
for each mitt you want to make you'll need:
- 1 dollar store oven mitt
- 1/4 yd exterior fabric (something that is heat resistant and natural, like cotton)
- 1/4 yd interior fabric (I used French terry cloth, but you could probably use a flannel)
- sewing supplies: machine, pins, scissors, thread
start with your dollar store oven mitt
turn it inside out, exposing the seams.
using a seam ripper, take apart the mitt, and take off the binding at the bottom, we'll be re attaching it later.*
laying one side of the mitt on your interior fabric, cut out oven mitt shape, giving yourself 1/4 - 1/2" extra for the quilting. repeat for second half. pin in place with terry cloth right side out.
with the terry cloth on the bottom, sew along the quilting lines that are already in place, repeat for other half.
take your quilted pieces and lay on top of your exterior fabric. cut around mitt, again giving yourself 1/4-1/2" extra for quilting. [you can always trim off extra later] pin in place with right sides out (interior fabric on bottom, interfacting in the middle, exterior fabric on top.)
with your exterior fabric on bottom, sew along the quilting lines you made on your interior. repeat with other half.
now, take your binding, and pin in place, leaving middle loose.
sew binding back onto the mitts, including the hanging loop.
I used a fancy stitch, to help keep it in place a little better, and because I liked it.
placing the two exteriors together, pin in place. tuck the hanging loop in between the panels. using a 3/8-1/2" seam sew around all of the raw edges.
trim the excess around the thumb, fingers, and 'dip'. this should make it a little easier to turn.
the turning was actually the hardest step of this process, since we added a third thick layer, but once it is right side out, you are finished!
later days
*my original plan was to remove the original blue panel completely, but when I pulled part of it back, the thermal interfacing was loose under the blue panel. I decided that I didn't want interfacing clumps everywhere, so I left the panel in place.

No comments:
Post a Comment